Contact

MoveRoll Oy

Pienteollisuustie 3 B
06450 Porvoo
Finland

Phone: +358 400 610764
E-mail: info@moveroll.fi

Social media

Zero energy receiver


MoveRoll zero energy receiver is used to receive the roll into the slat, chain or belt conveyor, or any other application in which the roll need to be stopped.

Equipped with special roll-handling cushions, the zero energy receiver stops the roll gently without damaging the roll quality. Zero Energy Receivers have been developed for low-frequency roll handling applications. They are very simple constructions and low-cost solutions that do not need to be connected to any energy sources.
To find more information about the key data and technical information of MoveRoll Zero Energy Receiver Click here.
Zero_energy_receiver_2.JPG


Zero energy receiver benefits


Zero Energy Receivers have been developed for low-frequency roll handling applications. They are very simple constructions and low-cost solutions that do not need to be connected to any energy sources. The unique receiving method uses self-inflating energy absorbers with adjustable energy absorbing capacity. This way most of the roll dimensions and widths can be handled with care. Compared to steel stops, the most significant benefit of the new receiving solution is that the energy actually is absorbed, while steel stops cause rolls to bounce back to the deck and eventually slow down through friction. This absorption of energy means two major improvements for the roll receiving process: first, and most importantly, increased workplace safety. Secondly, a reduction in paper roll damage. The improvement in safety is due to the energy absorbing function of Zero Energy Receivers which prevents paper rolls from bouncing back and forth heavily. This is especially relevant for applications where operators are working on decks. Winder decks are typical examples of this. Less roll bouncing also means less friction and roll spinning, and, accordingly, a reduction of paper cuts and tears. Furthermore, with Zero Energy Receivers paper rolls only ever touch the self-inflating energy absorbers; by having no contact with the steel plates, damages to paper rolls are further reduced.

Zero_energy_1.jpg